PDA

View Full Version : Non cataloged accessory items



Michael Sewick
04-23-2009, 02:46 PM
Here is an area to share accessory items that are no longer cataloged.

The CR3007 is a higher current (0.5 A) PWM to Analog converter. It is designed for 24 volt operation and outputs 0-10 VDC.

The EC2048 is a male 55 pin connector assembly (same unit used for circuit board solder connection in R360). This can be used for a harness test fixture.

Replacement retention clip for the R360 classic controller is 5304547.

Basic controller connectors
Complete set:
EC0456:https://www.ifm.com/products/us/ds/EC0456.htm
Individual (package of 200)
6 pole EC0460: https://www.ifm.com/products/us/ds/EC0460.htm
4 pole EC0461: https://www.ifm.com/products/us/ds/EC0461.htm
8 pole inputs EC0462: https://www.ifm.com/products/us/ds/EC0462.htm
8 pole outputs EC0463: https://www.ifm.com/products/us/ds/EC0463.htm

Crimp contacts for Basic controller:
EC0468 Standard Timer Contact 0,5...1,0 mm² (1000 pieces)
Tyco AMP order no.: 927848-1

EC0469 Standard Timer Contact 1,0...2,5 mm² (1000 pieces)
Tyco AMP order no.: 927850-1

EC0470 Power Timer Contact 1,25...2,5 mm² (1000 pieces)
Tyco AMP order no.: 927838-1

Wire seal for Classic controller (55 pin connector) and CR253x:
IFM part number F30003 or direct through Newark:
http://www.newark.com/te-connectivity-amp/828904-2/wire-seal/dp/26H0921

Plug for unused pins in Classic controller (55 pin connector) and CR253x:
IFM part number F30004 or direct through Newark:
http://www.newark.com/te-connectivity-amp/828922-1/cavity-plug-2-5mm-pin-connector/dp/85C0366

Crimp tool for all ifm crimp connectors
ifm UCR011 - Special Order Item
Newark Part # PA1306 - typically in stock
http://www.newark.com/greenlee-communications/pa1306/crimper-tool-with-die-non-insulated/dp/92B6687

Extraction tool for Junior Power timer contacts (55 pin connector)
ifm UCR013 - Special order item
Newark Part # 78H0240 - typically in stock
http://www.newark.com/amp-te-connectivity/1-1579007-6/extraction-tool/dp/78H0240
As a second choice:
ifm UCR012 - Special order item
Newark Part # 89H9183 - typically in stock
http://www.newark.com/amp-te-connectivity/1-1579007-4/extraction-tool/dp/89H9183


Crimp contacts for Classic controller (55 pin connector) and CR201x, CR0303:
Details on crimp and AMP/Tyco part numbers:
We ship the kits EC2089 for wire gauges 17 to 20 (0.5mm2 to 1mm2). That is TE part number: 927771-3.
http://www.te.com/usa-en/product-927771-3.html (http://www.te.com/usa-en/product-927771-3. html)
For a wire gauge range from AWG 17 to AWG 14 (1mm2 to 2.5mm2) the equivalent TE part number is: 927768-3
http://www.te.com/usa-en/product-927768-3.html