Search:

Type: Posts; User: pkennedy

Page 1 of 2 1 2

Search: Search took 0.02 seconds.

  1. Thread: Logging Data

    by pkennedy
    Replies
    8
    Views
    3,172

    Ya I found a company in UK that makes them and...

    Ya I found a company in UK that makes them and ordered one up, Thanks for the info, I haven't started testing the set up yet but hopefully soon.

    Thanks.
  2. Replies
    4
    Views
    1,936

    Have you tried to reset bootloader from the...

    Have you tried to reset bootloader from the standard side? I had issues were CR0232 and CR0032 where the led was red, I contacted ifm support and was able to get warranty for the units with issues.
  3. Thread: Logging Data

    by pkennedy
    Replies
    8
    Views
    3,172

    Hey Ryan, Were you able to get the raspberry...

    Hey Ryan,

    Were you able to get the raspberry pi to work as a data logger for this system? If so did you build a CANbus adapter or purchase one, I have a very similar application and it would be...
  4. Thread: Logging Data

    by pkennedy
    Replies
    8
    Views
    3,172

    I use a CR1081 with an EC2099 to log data however...

    I use a CR1081 with an EC2099 to log data however it's quite a bit more expensive than the CR0452 display (~$2000 difference). We used to have CR3101 which is no longer sold or recommend by ifm.
  5. Replies
    3
    Views
    3,442

    http://www.ifm.com/ifmus/web/ecomatic-download.htm

    http://www.ifm.com/ifmus/web/ecomatic-download.htm
  6. Replies
    2
    Views
    6,440

    How would I be able to determine how much memory...

    How would I be able to determine how much memory the can remote would need for a CR0401 and to determine if I'm currently using too much memory?
  7. Replies
    6
    Views
    4,141

    I uninstalled and reinstalled the maintenance...

    I uninstalled and reinstalled the maintenance tool and changed the port I was connecting my CANFox too and that fixed my issue.
  8. Replies
    2
    Views
    2,380

    I'm fairly new with PLC's so take this...

    I'm fairly new with PLC's so take this information with a grain of salt but have you defined your CAN2? I've had issues where I didn't define CAN2 function block and that prevented me from...
  9. Replies
    6
    Views
    4,141

    SiE MT_API Version 7.4.44.0 When the CANfox is...

    SiE MT_API Version 7.4.44.0

    When the CANfox is connected the information shows up:

    Hardware Type: CANfox(1) CH01
    Firmware: 0x314D
    Serial Number: D3000BBC0000
  10. Replies
    6
    Views
    4,141

    Maintenance Tool and Windows 10

    I'm having issues with Maintenance tool and CANfox, I download the most recent maintenance tool w/ CANfox driver from the ifm website which has windows 10 as a system requirement however after I...
  11. Replies
    5
    Views
    2,319

    Okay sounds good, thanks for your help.

    Okay sounds good, thanks for your help.
  12. Replies
    4
    Views
    3,639

    I don't have any bitmaps only elements, all...

    I don't have any bitmaps only elements, all rectangles and the most is 37. I have it set for 250 and the cycle time were 45000 usec - 52000 usec before connecting to the controller, I didn't have...
  13. Replies
    5
    Views
    2,319

    Ya that's what I was using was just the...

    Ya that's what I was using was just the maintenance tool and download tool.
  14. Replies
    4
    Views
    3,639

    I have 3 screens, screen one shows 5 data values...

    I have 3 screens, screen one shows 5 data values (Press, Temp, Flow Rate, Total Flow, Tank Level), screen 2 shows (Pressure, Temperature, HP, RPM and Tank level) screen 3 shows all 9 values. When I...
  15. Replies
    4
    Views
    3,639

    CR0452 Calculations

    I would like to have variables switch between metric and imperial values, there is approximately 10 values that will need to switch between metric and imperial. It seems if I try to perform the...
  16. Replies
    5
    Views
    2,319

    CR0232 and RS232 Connection

    I'm having issues trying to connect to my controller via RS232, I can connect with can no problems however when I try with RS232 in both downloader and maintenance tool It can't connect.

    I've...
  17. Thread: USB Control

    by pkennedy
    Replies
    3
    Views
    2,729

    I've determined a way however it doesn't use...

    I've determined a way however it doesn't use USB_STORAGE_HANDLER, it uses linux commands with the system_asynch function block with the following command:

    'umount /tmpfs/media/usb/device'

    I was...
  18. Thread: USB Control

    by pkennedy
    Replies
    3
    Views
    2,729

    Anyone have any suggestion?

    Anyone have any suggestion?
  19. Thread: USB Control

    by pkennedy
    Replies
    3
    Views
    2,729

    USB Control

    I'm having issues with a CR1081, I have a USB stick connected directly to the screen and I have the second USB connect using the EC2099.

    Using the USB_STORAGE_HANDLER I'm try on only have one of...
  20. Replies
    1
    Views
    2,154

    The issue was with my Baudrate, I went to...

    The issue was with my Baudrate, I went to Resources > PLC Configuration> CANOPEN Master > CAN parameters and had a baudrate of 125000 for the PLC for CR1081 I had a baudrate of 250000. I changed the...
  21. Replies
    1
    Views
    2,154

    Network Variables

    I'm having issues trying to send network variable from a CR0032 to CR1081. I have the exact same set up with a CR0232 and the variables transfer over with no issues however as soon as I try to use...
  22. Now if it was wired up incorrectly and the wiring...

    Now if it was wired up incorrectly and the wiring is changed would it still be stuck in a fatal error mode? Cause I rewired the unit just to power and ground (pins 10, 19, 32 and 20, 37, 42) along...
  23. What would cause a Fatal Error or Stop with Error on CR0032

    I have a CR0032 which is brand new we had trouble connecting download with RS232 so we used CAN and installed the firmware with Maintenance and CAN. I was able to install the program from Codesys.
    ...
  24. Replies
    2
    Views
    2,145

    It was the correct COM Port I checked in the...

    It was the correct COM Port I checked in the device manager, we connected using CAN-Fox to CAN Boss and used the maintenance tool and were able to load the firmware which then allowed us to install...
  25. Replies
    2
    Views
    2,145

    Issue Connecting CR0032 to Downloader

    I'm having issues connecting my CR0032 to download to install the firmware. I have Pin 10 and 50 connected to 12 V power with the PLC flashing fast green, I have Pin 2 on RS232 connected to Pin 25...
Results 1 to 25 of 26
Page 1 of 2 1 2