Search:

Type: Posts; User: Silas Curfman

Search: Search took 0.01 seconds.

  1. packing multiple bytes into a single word?

    What's the best way to combine multiple bytes into a common word? I've got a 10 bit signal I'm reading, 1 complete byte plus the last 2 bits of the preceding byte, and need to capture the decimal...
  2. Thanks Erik, I'll add that and check it out.

    Thanks Erik,

    I'll add that and check it out.
  3. Trying to write minimal test program for CR0401 + J1939 device

    I'm working on a bare bones codesys program for validating message transmission from a J1939 device (SureGrip joystick in this case) to a CR0401 controller. I've got a program running and receiving...
  4. missing library in ifm templat - CR0451

    Just noticed today that there's a library missing from the IFM template for the CR0451. SysLibVisu.lib needs to be added if you want to use programmable visualization elements. Without this library...
  5. Controller Index!

    OK. I got it. It was a controller index issue. CR0451 plugged into N2 of a CR0403 needs to use controller index "0" for network variables. The CR0403, in this case needing to send to a device in...
  6. CR0403 CR0451 with network variables

    Having mostly worked with solo CR0401 and CR0403 controllers, I'm now getting into connecting CANopen devices. I've run into trouble trying to pass network variables between the two. I have a...
  7. Distributed I/O options, Opto22 Snap IO?

    Does anyone know if the Snap IO line of products from Opto22 can work with codesys / IFM PLC's. They have a selection of I/O modules that offload much of the signal procession out of the PLC scan...
  8. Replies
    4
    Views
    12,605

    CAN_TX / RX & Sync questions

    After a long break from Codesys I've been back at it now. Been combing over the DemoStarterSet program being that I have a the Basic Kit here to work with. I'm getting fairly comfortable...
  9. Replies
    6
    Views
    7,163

    Very nice. Thanks. Did you convert a dxf/dwg of...

    Very nice. Thanks. Did you convert a dxf/dwg of the truck to a bitmap for your background? Are you doing all of your graphic HMI layout within CodeSys or do you use a separate design program to...
  10. Replies
    6
    Views
    5,625

    Thanks, looking forward to learning more about it.

    Thanks, looking forward to learning more about it.
  11. Replies
    6
    Views
    5,625

    New 4.3" display?

    Just received a flyer today showing a "new compact 4.3" HMI". Looks like a larger version of the CR0451 (2.8"). Is this a new display or a CR0451 with a size typo? Thanks.
  12. Erik, thanks. In that case it looks like I'll be...

    Erik, thanks. In that case it looks like I'll be leaning toward the MS2 lever. I was hoping I could get the height and stroke of the EH-3000 but it's 5 VDC.
  13. Replies
    6
    Views
    7,163

    Sounds nice. Are you able to post any pictures...

    Sounds nice. Are you able to post any pictures of the finished product / layout? Do you plan on using a protective cover / overlay on it while in service?
  14. help selecting joystick or throttle lever?

    Hello,

    We have an application where we've been using a rotary pot dial to pass a signal to our CR0401's, then scale it, and pass an output to a PWM hydraulic valve. All has worked well so far. ...
  15. I'll be interested in this too. I assume if your...

    I'll be interested in this too. I assume if your customer is wanting to run matlab they may be trying to run some sort of algorithm on the data coming in. If you knew what they were needing from...
  16. Replies
    2
    Views
    3,858

    Thanks. I'll file that one away for the future.

    Thanks. I'll file that one away for the future.
  17. Replies
    2
    Views
    3,858

    Red "X" on CR0451 Display

    I think I may have solved my own problem but I want to confirm it here too. If all you seen on a display after loading a background bitmap is a giant red "x", does that indicate the image is larger...
  18. Replies
    9
    Views
    11,534

    Wainbee, Erik, & tthomas... thanks, it's always...

    Wainbee, Erik, & tthomas... thanks, it's always interesting to see what's being done in other industries. Dealing with two sets of engine data sounds pretty interesting.
  19. Replies
    9
    Views
    11,534

    Just out of curiosity, can you say anything more...

    Just out of curiosity, can you say anything more about your project. I'm just interested in what type of control project takes two engines. What do you make? Thanks, sorry the address issue didn't...
  20. Replies
    4
    Views
    12,605

    Even though from an old post should this demo...

    Even though from an old post should this demo work for a new controller? I get errors that it can't find about 5 of the libraries referenced. Would I just add the newest version of the libraries...
  21. Thanks Erik. Hadn't thought about that. I'll be...

    Thanks Erik. Hadn't thought about that. I'll be making it a habit from here out.
  22. Replies
    4
    Views
    6,252

    Erik, The palette worked great. Our first...

    Erik,

    The palette worked great. Our first CR0451 just arrived this week as part of the Basic kit. I'm still getting to know it. I tested some imported graphics done both with and without the...
  23. Replies
    4
    Views
    6,252

    Color Palettes for HMI bitmaps?

    My manual for the CR0451 (pg 72) says there should be some color palettes available to make bitmap design easier (Adobe, Corel, etc). Where can I get a IFM friendly color palette for Corel Draw /...
  24. Replies
    0
    Views
    3,202

    3D Step file for EC0402?

    Is there a .stp file available for the Basic Display cover EC0402? Thanks.
  25. Best Practices for commenting program revisions?

    Hello,

    This is my first post here. Glad to be here. We're a small OEM that just started using IFM controllers and CodeSys earlier this year. We're already supporting the 6th revision of one of...
Results 1 to 25 of 25