Search:

Type: Posts; User: Jeremy Kopicz

Page 1 of 8 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    3
    Views
    246

    was the output energized?

    was the output energized?
  2. Replies
    3
    Views
    246

    I am not quite sure what you are asking, but on...

    I am not quite sure what you are asking, but on the data sheet for the controller it lists all the current specs for the controller:

    https://www.ifm.com/products/file/CR7506/CR7506.pdf
  3. Replies
    0
    Views
    177

    Lookup table interpolation (3.5)

    Here is some code that can interpolate values from a look up table (like a load moment chart)
  4. Replies
    2
    Views
    466

    unfortunately our hardware does not support this...

    unfortunately our hardware does not support this feature
  5. Replies
    0
    Views
    367

    Using The Camera Input

    First step is to activate the camera element:

    1) Go to Project>Project Settings
    2) Select Visualization Profile from the list on the left of the menu box
    3) Click the check box Next to the...
  6. First, make sure you have the block transfer...

    First, make sure you have the block transfer feature of the comm options enabled. You could increase the baudrate on the CAN network but this will affect all devices on the network, they would need...
  7. Replies
    3
    Views
    563

    You will need the actual display for this to work.

    You will need the actual display for this to work.
  8. Replies
    3
    Views
    1,490

    It is not meant to connect to an engine. You can...

    It is not meant to connect to an engine. You can use the CAN utility to monitor CAN Traffic.

    I believe there is a user guide posted somewhere in the forum.
  9. Replies
    2
    Views
    4,829

    the can remote libraries take up too much memory...

    the can remote libraries take up too much memory in the CR0401 to use as a data collection device. It can be used to remotely login via codesys
  10. It is normal to get this message when downloading...

    It is normal to get this message when downloading or logging in with codesys. any time any change is made the message will pop up.
  11. Heartbeat consumer needs to be enabled to monitor...

    Heartbeat consumer needs to be enabled to monitor the master.
  12. No LED on the extended side of CR023x

    The LED on the extended side of the 32 bit (Non basic) controllers will not light up until the firmware is loaded on the standard side.
  13. Why are you disconnecting the ground? If you...

    Why are you disconnecting the ground? If you pull the whole connector instead of just cutting power to vbbs i am guessing some strange things could happen. You are correct though, the outputs are...
  14. Corrputed image when updating 7" PDM NG

    Older PDM NG versions are not compatable with codesys 3.5 firmware, see below for the earliest compatible version:

    CR1080 from AF
    CR1081 from AE
    CR1082 from AC
    CR1083 from AG
    CR1084 from AC...
  15. Replies
    0
    Views
    1,850

    Codesys 3.5 Docs

    Attached are some documents to help get you started with codesys 3.5 (FOr PDM NG displays ONLY!)
  16. Replies
    3
    Views
    9,324

    The download tool doesn't support .PRG files. ...

    The download tool doesn't support .PRG files. The easiest thing to do is download the program with codesys, then create the boot project. You can then upload the .H86 file from the controller and...
  17. Replies
    4
    Views
    2,179

    First, convert all values to REALS. Second, you...

    First, convert all values to REALS. Second, you may run into issues when transmitting a real value over the CAN network. My recommendation is to multiply it by the number of decimal places you want...
  18. Replies
    1
    Views
    2,575

    Please contact ifm support for industrial...

    Please contact ifm support for industrial products such as the ASi gateway. This forum is for the mobile line of automation products.

    800-441-8246
  19. Replies
    1
    Views
    1,973

    Codesys 3.5 will only be available for PDM NG...

    Codesys 3.5 will only be available for PDM NG displays. The controllers and basic series will still use codesys 2.3

    We have some select projects being worked on now but these are beta test...
  20. Replies
    1
    Views
    2,918

    Use the download tool, got to 'Specials>Command>...

    Use the download tool, got to 'Specials>Command> Boot Commands> Goto Boot Loader With Factory Settings'

    You must have the default baud rate of the controller selected. For the CR0232 that is 115000
  21. Download Application to 32 bit PLC from CR108x, CR120x

    Attached is a program (codesys 2.3) that will download an application to a 32 bit controller (v2 firmware or later) from a PDM NG over can.

    In the UPDATE_R360 Global Var list you can edit the H86...
  22. Replies
    3
    Views
    5,014

    HMI Systems Keypad Update 32 bit

    Attached is a new HMI Systems Rocker switch interface for ifm 32 bit controllers and rocker config sample.

    You can set the number of switches, LED PGN and Button PGN in the HMI_SYS_VARS global var...
  23. Replies
    1
    Views
    2,082

    Updated 2-04-2016

    Updated 2-04-2016
  24. Replies
    1
    Views
    2,082

    Ametek Keypad

    J1939 Ametek Keypad interface for 32 bit controller.

    In the AMETEK_KEYPAD_VARS you can set the number of keypads (bNoOfKeypads) and initialize the source address array with the source addresses...
  25. Replies
    2
    Views
    1,804

    any idea what your scan time is when the pc is...

    any idea what your scan time is when the pc is not connected?
Results 1 to 25 of 185
Page 1 of 8 1 2 3 4