Results 1 to 3 of 3

Thread: Can_2_transmit

  1. #1
    Join Date
    Oct 2016
    Posts
    22

    Default Can_2_transmit

    hi
    I am using IFMCR0032 controller and I need to send via can2 ds305 massage .
    I try to use can2_sd0_basic lib with the function CAN2_TRANSMIT
    the problem is that when compile the project error is appear
    error 4001 :can2_sdo_read:identifier 'can2_basic' not defined
    what the problem could be?
    thank you in advance

  2. #2
    Join Date
    Aug 2016
    Posts
    26

    Default

    I'm fairly new with PLC's so take this information with a grain of salt but have you defined your CAN2? I've had issues where I didn't define CAN2 function block and that prevented me from transmitting over the CAN2 network.

  3. #3
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    299

    Default

    Where is this library coming from?
    can2_sd0_basic

    That isn't a standard library from ifm or Codesys.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •