Results 1 to 3 of 3

Thread: Network Variable Basics

  1. #1
    Join Date
    Aug 2009
    Location
    ifm Exton, PA
    Posts
    195

    Default Network Variable Basics

    Attached is a tutorial on the use of Network Variables.
    Attached Files Attached Files

  2. #2
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    295

    Default

    Great write up Jeremy! I would like to add that if you have a question of identifiers to use check this link:

    http://mobilecontrols.ifmefector.com...hread.php?t=41

    This list has the identifiers that are used by the CANopen standard.

  3. #3
    Join Date
    Aug 2013
    Posts
    26

    Default

    One more thing:
    Verify that network variables are enabled in target settings!
    And if they were not, you will need to add libraries needed to work with network variables.
    Below libraries needed for BasicController/ PDM-NG:
    3S_CANOPENNETVAR.lib
    Ifm_RAWCan_NT_v0x000x.lib
    Ifm_NetVarLib_NT_v0x000x.lib
    Ifm_CANopen_NT_v0x000x.lib
    3S_CANopenManager.lib
    3S_CanDrv.lib

    And here the libraries for Cabinet-, Smart-, Classic-, Extended-, Safety- Controller / PDM, PDM-Compact, PDM-Smart:
    3S_CANopenManagerOptTableEx.lib
    3S_CanDrvOptTableEx.lib
    3S_CANopenNetVarOptTableEx.lib
    3S_CANopenMasterOptTableEx.lib
    SysLibCallback.lib
    Ifm_CRxxxx_CANopenxMaster_Vyyyy

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •