Results 1 to 2 of 2

Thread: MOBA controller stop blinking

  1. #1
    Join Date
    Aug 2016
    Location
    OKC
    Posts
    7

    Default MOBA controller stop blinking

    I have a MOBA controller System that im trying to receive two messages from 28h, 30h.
    I got the moba connected and I can read the sensor value on the moba displays , I also hooked a can sniffer and I can data on 28h ,30h.
    But when I connect the cr0033 CAN4 to receive 28h, 30h:
    1- the blinking green on the moba controller go off.
    2- reading turn from a number to a NO sens. message.
    im not sure why that being caused, I checked my can terminator to be 60 ohm, I checked the cr0033 can 4 pin(44,26) to be connected properly, I enabled can4 and I have function block to receive id:=16#28 .
    any ideas, please help!

    Chadi Saouli
    Cmi-Roadbuilding

  2. #2
    Join Date
    Aug 2016
    Location
    OKC
    Posts
    7

    Default

    Found the issue under the plc configuration changed node #4 to 125000kb and that fixed the issue with receiving data.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •