Results 1 to 3 of 3

Thread: CR1203 backup/restore from usb

  1. #1
    Join Date
    Sep 2016
    Posts
    33

    Default CR1203 backup/restore from usb

    Hello,
    is it available some procedute to backup and restore a CR1203 like the old model CR1201, using a USB pendrive?

    BR

  2. #2
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    304

    Default

    Yes just take a look into the manual. There are no buttons so you either have to put it into the setup mode via the Service pins or you can have a function block call that put the display into setup mode to get to the backup/restore.

  3. #3
    Join Date
    Sep 2016
    Posts
    33

    Default

    Fixed.
    There was a misunderstanding with the polarity of service pins. In firmware update manual there was indicated service 0 -GND and Service 1 - VBB; but if you want to access at SERVICE menu, the service pin polarity must be inverted service 0 -VBB and service 1 -GND.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •