Results 1 to 3 of 3

Thread: Cr0451 led

  1. #1
    Join Date
    May 2009
    Posts
    87

    Default Cr0451 led

    The status LED on my Cr0451 is OFF, yet my application runs. The LED was blinking green at 5hz before I downloaded firmware (V010203), then went solid green after successful download.

    The LED goes from red to green whenever I power the unit up, but goes OFF once the application comes up. I've tried two IFM example programs with the same results.

    Curious what, if anything, this indicates. Thanks.

  2. #2
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    300

    Default

    My first thought is does the application turn the LED off?

  3. #3
    Join Date
    May 2009
    Posts
    87

    Default

    Erik,
    It does. I had forgotten about that, but stumbled across it shortly after posting my question. Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •