Results 1 to 3 of 3

Thread: Rotating the connector on a CR9120 (OEM version of CR1051)

  1. #1
    Join Date
    Oct 2011
    Posts
    19

    Default Rotating the connector on a CR9120 (OEM version of CR1051)

    I have a CR9120 and a Murr 90-degree overmolded cable. The keying is arranged so that the cable comes out of the connector and immediately turns towards the bottom edge of the screen (see photo).

    Can I loosen the large nut on the controller connector and rotate the connector 90 degrees without causing harm to the screen?

    Thanks,
    Dave
    Attached Images Attached Images

  2. #2
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    300

    Default

    I wouldn't recommend turning the connector. The connections are pretty short on the inside of the CR1050.

  3. #3
    Join Date
    Oct 2011
    Posts
    19

    Default

    Thanks. I didn't like that option either so I replaced the cable with a IFM straight M23 cable instead.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •