Results 1 to 1 of 1

Thread: Serial debugging challenges with CAN communications

  1. #1

    Default Serial debugging challenges with CAN communications

    Serial debugging for the R360 PLC under CoDeSys 2.3 can cause missing CAN- messages. The reason is that the interrupt priority of the serial interface is higher than the CAN interface. In cases where this causes problems, the attached workarround can be used. Please note that this FBD is not an official version and should be used very carefully.
    Attached Files Attached Files

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •