Results 1 to 5 of 5

Thread: Remote Throttle on Kenworth Pacaar Chassis

  1. #1

    Default Remote Throttle on Kenworth Pacaar Chassis

    Deleted by Wainbee Integrator
    Last edited by Wainbee Integrator; 12-11-2013 at 02:46 PM.

  2. #2
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    300

    Default

    Thanks for the info. Chassis throttle control can be tricky. It seams every manufacture does it differently.

  3. #3
    Join Date
    Aug 2009
    Location
    ifm Exton, PA
    Posts
    196

    Default

    PGN0 TSC1 for RPM control is not available on road chassis. However, you can still control the throttle over the network by either using the cruise control /PTO functionality (PGN 65261) or remote throttle Functions (PGN 61441).

    The engine would need to be programmed to accept these commands.
    Last edited by Jeremy Kopicz; 06-19-2013 at 09:39 AM.

  4. #4
    Join Date
    May 2013
    Location
    Novi,MI
    Posts
    1

    Default Control current PWM

    Output control current PWM is used for Hydraulic application, why it used at remote throttle (Engine's ECM)??

  5. #5

    Default

    Deleted by Wainbee Integrator
    Last edited by Wainbee Integrator; 12-11-2013 at 02:46 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •