Results 1 to 5 of 5

Thread: CR0133 Template

  1. #1
    Join Date
    May 2009
    Posts
    87

    Default CR0133 Template

    Is there a template available for the CR0133 controller? I might have missed it, but I don't see one in the latest CoDeSys(CODESYS_V23942_V35) download. Thanks.

  2. #2
    Join Date
    May 2009
    Posts
    87

    Default

    I also noticed that there's no target file available either.

  3. #3
    Join Date
    May 2009
    Posts
    87

    Default

    Just came across the following in a recent product update. Sorry for previous posts.

    CR0133 - Software
    • Because the standard side is the same as a CR0033 controller, a CR0033 target has to be used. That you can add the extended site, it is recommended to build the the project based on a CR0033 CANopen master template (ifm_template_CR0033master_Vxxxxxx.pro).
    • The eds file (ExB01_V010101.eds) is on the internet in download area.
    • The resx- and md5-files which are preloaded on the CR0133 extended side during production are in forum (Link).

  4. #4
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    299

    Default

    You got it before I did. Yes the CR0133 is just a CR0033 with the extended side a CANopen slave.

    Attached is the EDS file if you can't get it on the download area.
    Attached Files Attached Files

  5. #5
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    299

    Default

    Attached is the firmware for the second side in case it gets wiped out. This would be the second side for a CR0133 or CR2532. It could also be used to set the the CR2530 up as a CANopen slave then just use the above EDS file.
    Attached Files Attached Files

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •