Results 1 to 3 of 3

Thread: hange the node ID on a CR0451 slave

  1. #1
    Join Date
    Sep 2011
    Posts
    5

    Default hange the node ID on a CR0451 slave

    Is there a way to change the node ID on a CR0451 slave?

    Like the CAN1_SLAVE_NODEID function block for a CR0303 slave

    This would allow me to use the same programme on multiple screens and just change the ID when the screens are installed.

  2. #2
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    300

    Default

    You can use the CANOPEN_SETSTATE function block.

    I tested and did find that when you power cycle the unit it goes back to the Node ID that is set in the PLC Configuration. You will have to take care of that in your code.

  3. #3
    Join Date
    Sep 2011
    Posts
    5

    Default

    Worked. Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •